Product Summary

CP-900 SERIES

Size 25 (2-1/2 Inch Diameter)
Hollow Shaft Encoder

Below is a summary of the CP-900 family of products. Data sheets with complete technical specifications are available at CP-900 Series Data Sheet for the CP-900 Incremental Sine/Cosine, Incremental Digital, and the 12 & 14 Bit Absolutes. Our data sheets are in PDF format and may be viewed using Adobe Acrobat.

CP-900 Incremental Sine/Cosine.

The CP-900 is a sinusoidal "infinite resolution" encoder specifically designed for digitizing the waveform. The sine/cosine versions allow a high degree of interpolation because of the low distortion waveform for extremely accurate positioning and speed control. May be used with our CP-1064 64X Interpolator which provides as many as 256 measuring steps for each cycle.

CP-950/970 Digital Incremental & Absolute.

The CP-950/970 series size 25 is available as an incremental encoder of up to 10,000 cycles per revolution (40,000 counts or measuring steps). The absolute versions come is 12 bit and 14 bit single-turn models including a 0-10V or 4-20mA "optical potentiometer" version.

Some versions are available with an integral fiberoptic data link, 24 bit multi-turn, High Count Encoders (HHC) with up to 128,000 cycles. See our Fiber Optic Encoders or our Specialty Encoders for more information.

The light source is a single light emitting diode, servo controlled for constant light output over time and temperature, the sensor is a monolithic silicon array.

Available Configurations

• CP-950 Incremental Digital
• CP-970 Incremental Digital 8 to 30 Volts
• CP-950 12 & 14 bit Absolutes

Options:

• custom linecounts and index configurations
• through shaft
• custom shaft and cable configurations
• connector options with rear and side exits
• extended temperature range (-30°C to +100°C)
• shaft seal